03-25-2011 11:54 AM
Hello,
i`m trying to make project using LabVIEW Embedded Module for ARM Microcontrollers 2010 and my STM32F103 board. Everything is fine . I made new project, added some outputs, but when i try to build it, it stucks for a while and I get error:
[17:38:59] Status: Error
Unexpected error occurred.
[Source: Cannot read project file 'C:\Users\Sh\
Documents\Untitled Project 1\STM32F103x\
Application\0.061\Project\LabVIEW.uvproj' !
Timed out waiting for a response
Detail: [UVSC_PRJ_LOAD, MSG: 0x201F, STATUS:
0x1D] Code: 29]
I`m using that target : http://forums.ni.com/ni/attachments/ni/420/2699/1/STM32F10x.zip
Any ideas what might be wrong?
Thanks.
04-01-2011 09:34 AM
Hi mark331
I would recommend You to go in details through forum http://forums.ni.com/ni/board/crawl_message?board.id=420&message.id=1886. There is multiple number of tips and instructions about ARM STM32F103 and LabVIEW.
I am pretty sure, that You can find an answear there.
Best regards
Barbara