08-21-2009 01:36 AM
08-24-2009 02:25 AM
Hi Staffan
So you can create new installers, but after creating them you cannot open the properties window? What additional installers are you including if any? Any targets involved? The smaller project that works, does that have any additional installers?
Best Regards
David
NISW
08-25-2009 05:05 AM
Yes, I can create a new installer and build it (at least it worked once), but I was then not able to open the property window.
No targets involved.
I have removed all additional installer except for the LVRunTimeEngine 2009.
/Staffan
08-25-2009 06:04 AM - edited 08-25-2009 06:05 AM
Hi Staffan
Can you try to recreate the project? Open a new project, add you files, create a new exe build spec and then a installer build spec. See if that solves your problem
Best Regards
David
08-25-2009 06:11 AM
Hi David,
I have been thinking about doing that. I have tried to strip it all down, but have not yet started with a new Exe. I will do that. It may take a while. It runs really slow. Just to open the property window of the installer in 8.6.1 in my project takes at least 1/2 hour.
/Staffan
08-25-2009 06:17 AM
That's a really long time. What are your computer specs and how big is your project (number of VIs, shared variables, etc)
Regards
David
08-25-2009 06:34 AM
Computer:
HP Compaq nw8440
T2600 @2.16 GHz
2 GB RAM
Project:
3000+ VIs
No shared variables
LVOO-classes
/Staffan
08-25-2009 06:52 AM
Ok, that's quite a few VIs...Understand that it will take a while to recreate the project.
Just an errant thought, have you already upgraded the VIs to 2009 (masscompile or save all)? If not that could be something to try.Remember to always back up your files before masscompiling.
Best Regards
David
08-25-2009 06:57 AM
I have recompiled all VIs to 2009. I am running a copy of the project on a second computer which only have LV 2009 (I also have all my code in SCC).
/Staffan
10-20-2009 02:29 AM
Hi
This case was continued directly with National Instruments support. The solution was Extending Virtual Memory Usage in Windows.
Best Regards
David