Open FPGA VIReference : FPGA vi is not complied

[Navin4561]

 Hai everyone,

i am trying to read and write data through Analog channels of NI5781 transreciver module.

i am running example design which was there in  Find examples hardware input and output/FlexRio/Ni5781/NI5791 clock select.lvproj

when i run this design i was getting this error .

i had followed this procedure, https://zone.ni.com/reference/en-XX/help/371599P-01/lvfpgahelp/compiling_fpga_vis_howto/

still i couldn't able do it.

can any one please help me.

i am looking forward to your suggestions and answers

[GerdW · Accepted solution]

Hi Navin,

---

@Navin4561 wrote:

i had followed this procedure, https://zone.ni.com/reference/en-XX/help/371599P-01/lvfpgahelp/compiling_fpga_vis_howto/

still i couldn't able do it.

i am looking forward to your suggestions and answers

---

To run a FPGA VI on a FPGA you need to compile it first…

What weren't you "able to do"? Which errors did you encounter?

[Navin4561]

@GerdW thank you for your response.

i have compiled the FPGA VI , now everything seems ok.

but i am getting err -61024.

i am beginner at labview, can you please help me out.

reagrds

Navin kumar

[Navin4561]

Hai,

can anyone give me the solution for error: -61024.

i am eagerly looking for your response.

thanks&regards

Navin

[pdengrd · Accepted solution]

Go visit ni.com and search for "-61024". You will find a lot of useful resources about this error. The following pages should be helpful:

• https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z000000kJ0MSAU&l=en-US
• https://forums.ni.com/t5/LabVIEW/Error-61024-when-running-FPGA-VI/td-p/355472?profile.language=en