From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
12-14-2012 08:48 AM
Hi all
I am asking the following since I have little knowledge on labview
I have a merge signals function that should take 7 signal as inputs . but i have no idea how to see the 7 signal outputs on a waveform chart. i want to display the 7 signals each of them on a waveform chart. (as looking into the front panet i should see one single waveform chart displaying the 7 signals . )
can you help me guys ?
Thank you .
Solved! Go to Solution.
12-14-2012 08:57 AM - edited 12-14-2012 08:57 AM
Hi Bill,
I think you should definitely try the 'Merge Signals' functino from the Express Palette -> Signal Manipulation.
12-14-2012 09:00 AM
zyl7 thank you for the reply .
Yeah I have used this function but i have no idea how to make the 7 signal at the outputs plotted in a waveform chart like you see in the attachement.
12-14-2012 09:12 AM
If you right click your chart, then you should see the option 'stack plot'... It wroks fine me, see pic attached !
12-14-2012 09:27 AM
Hi Zyl7
I did exactly what you told me . right click the waveform chart then, stack plots .then i changed the number of plots of the waveform to be 7 . but i am still seeing only 1 single signal .
why is that ??? m confused !!
12-14-2012 09:44 AM
I'm confused to... Please find attached a really simple VIs which does the job you ask...
Are you graphing in a Graph or in a Chart ? The control in my VI is a chart.
12-14-2012 09:45 AM
Zyl7
Thank you so much . it was all my fault . it is fine now . thank you so much 🙂