Labview example for data capture using 5102 scope card

[pazzer]

How can I program a Labview Vi to control, and capture a waveform using the 5102 scope card. I need to be able to set it up to continually capture a waveform (Channel 1 and Channel 2) when triggered on a rising edge of channel 1 and then store the data on disk automatically, then wait for the next trigger.
Any help or tips as to how I could do it would be helpful.

Thanks

Allan

[Zvezdana S.]

Allan,
Please find the attached zip file that has some useful LabVIEW examples with scope 5102

Zvezdana S.
National Instruments

[neiltoz]

Labview 6i has an application with a name that includes 5102 and sync ("
5102Sync.vi"?). It allows one channel to act as the trigger for both channels.
Requires a cable between the PFI connectors (NI sells for $45 each). It
works, but if you have to take more than about 1 sec worth of data at a time,
be prepared to wait for results. The 5102 can only dump a completed
acquisitions worth of data at a time.


Neil

========================================
Please remove the "nt" for legitimate email. Thanks!
========================================