From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
01-26-2010 04:13 AM
Hi,
this example is for autocad 2007. Check the activex refnum in the diagram.
cosmin
01-26-2010 05:50 AM
01-26-2010 05:56 AM
Hi,
run in highlight execution. tell me from wich node the error occur.
cosmin
01-26-2010 06:18 AM
01-26-2010 08:35 AM
01-28-2010 05:39 PM
Can anyone help with info on interfacing Labview and Revit Architecture. It is possible with C sharp and VB but i prefer to use LV. I am having problems calling my Revit file in LV.
(FYI- Revit is an Autodesk product like autocad)
demmy
10-19-2012 03:08 AM
Hi, Your information about Autodesk are from 2010. Now, I am interesting for 3D CAD Autodesk Inventor 2013 machine prototyping
There are WEB information Mechatronics Series Part II: Conceptual Design Visualisation - Introduction to CosmosMotion ad LAB VIEW. There is about SolidWorks Office Premium 2007. This is 5 year old software so I presumed any progress with possibility to use another 3D CAD, too.
http://zone.ni.com/devzone/cda/tut/p/id/6025
http://www.ni.com/white-paper/6183/en
Where can I get detailed new information about machine prototyping with Autodesk Inventor 2013?
Do you know if tere are any plans to do that in future e.g. with Autodesk Inventor version 2014?
Mike J.
10-22-2012 02:15 PM
I spent a good deal of time looking for resources that could help you but the links you posted were the most up-to-date that I could find. I found in some other forum posts that it may help for you to check out some AutoCAD forums and see if there is any pertinent information there.
Regards,
Blake C.
Applications Engineer
National Instruments
07-19-2014 03:07 PM
Hi,
I recently posted an example project showing how to interact from LV to AutoCAD using .NET
https://decibel.ni.com/content/docs/DOC-38857
Jannis
08-26-2014 05:45 AM
hello all
how can i send data to writ it to unigraphics or Autocad using LV program
i have some points data XYZ and i need to send it to auto cad or unigraphics to draw it automaticlly