10-03-2017 09:11 AM
Hello,
I installed the vision and motion(for my rio) library yesterday and i don't know why the vision assistant vi is missing.
I have followed the same steps as this guy: yt vision&motion for myRio
Someoane can help me ?
Thank you.
Solved! Go to Solution.
10-03-2017 10:09 AM
It looks like you installed Vision Acquisition Software (the driver software to acquire images), but not Vision Development Module.
Vision Assistant is part of the Vision Development Module. That's the installer you want to run.
10-03-2017 01:20 PM
it says that vision module is installed ?! i have labview 2016
10-03-2017 01:53 PM
No, it says Vision Common Resources. That's different. The common resources are the components shared between the driver and the Vision library.
You need to download and install this:
http://www.ni.com/download/vision-development-module-2017/6640/en/
10-03-2017 03:47 PM
This is from my Laptop (I don't have Vision installed on a remote system):
Bob Schor
10-04-2017 01:44 PM
It works ! Thank you
05-01-2019 06:19 PM
How can i make a code that will help me to make 2 usrp 2942R works as a tx and a Rx and to communicate with each other ?
Which block diagram i can add either to the tx or the rx to acomplish that target plz 😊
Thanks on advance