04-08-2019 11:02 AM
Hi all,
Has anyone developed a LabVIEW driver for the Teledyne SSI MX-Class MX010PFX3A pump or the Agilent/Varian ProStar Model 210 pump?
All MX-Class pumps should use the same general commands, so any MX-Class LabVIEW driver would also probably be acceptable.
Thank you,
Zach
04-09-2019 10:17 AM
Hi Zach,
We have some third-party instrument drivers on our website. While I could not the specific drivers you requested through the keywords provided, it is possible they are there if you search their specific model number. Otherwise, there are some Agilent MXA series drivers that may or may not work, but are there for you to refer to.
The link to our third party driver downloads is here: http://www.ni.com/downloads/instrument-drivers/
Regards,
Andrea
04-09-2019 12:19 PM
Hi Andrea,
Thank you for the recommendation! I could not find the specific drivers on the third-party driver downloads or by contacting the manufacturers either, unfortunately. My next step is probably to find a similar driver to use as a template and learn how to develop a driver.
Thank you again,
Zach
07-09-2021 09:02 AM
Hi Zach,
Did you find a useful driver to control the Teledyne MX class?
Thank you so much!