LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

Is there a list of specifically what is and is no tested on the PXI-6259 when self-test is run under MAX?

Is there a list of specifically what is and is not tested on the PXI-6259 when self-test is run under MAX?

0 Kudos
Message 1 of 4
(2,316 Views)

Self test doesn't do all that much...  It is a check to make sure the driver can communicate with the hardware.

 

I'm not sure what you're hoping to test for, but you might want to take a look at the DAQ Diagnostic Utility if you're trying to diagnose damaged or defective hardware.

 

 

Best Regards,

John Passiak
0 Kudos
Message 2 of 4
(2,292 Views)

I was hoping for an automated go-no-go test that verifies all functionality of the Card or at least a list of what actually is functional after passing the test.

0 Kudos
Message 3 of 4
(2,279 Views)

@Ed___ wrote:

I was hoping for an automated go-no-go test that verifies all functionality of the Card or at least a list of what actually is functional after passing the test.


So exactly the DAQ Diagnostic Utility?  The tests done are described in the readme.

 

 

Best Regards,

John Passiak
0 Kudos
Message 4 of 4
(2,239 Views)