08-02-2019 03:33 PM
Hi, everyone!
I'm trying to make a myRIO project using LINX for the code. My problem is that I don't know how to
read or initialize the device using LINX.
If you can explain to me how can I do it, or show me a VI example where you use the LINX code with myRIO, I'd be grateful.
Thanks advance!
Solved! Go to Solution.
08-02-2019 07:32 PM
Galeano, I found this forum from the LabVIEW MakerHub community that can be useful for you: LINX for NI myRIO-1900
Apparently, the best place to start is enabling the myRIO support for the toolkit in LabVIEW: Tools»LabVIEW Hacker»LINX»myRIO Support.
All the best,
08-03-2019 09:26 PM - edited 08-03-2019 09:30 PM
Hey Oscar,
Thanks for the response!
I've already saw that forum, and I did the "enable myRIO support" and so. My problema is now in the select channel for "Check channel" tool. I don't know exactly what channel it's asking me for and how I could configure it.
08-04-2019 12:06 AM - edited 08-04-2019 12:07 AM
Here I found a solution to read the device myRIO.
The code was made to read the MPU sensor parameter using myRIO, and LINX code.
Thank you anyway, Oscar!