LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

I need to program a Hittite Fractional-N Synthesizer Evaluation Kit with a HMC702LP6CE an external YIG oscillator. Not sure how to use Labview to control the PLL.

I need to program a Hittite Fractional-N Synthesizer Evaluation Kit with a HMC702LP6CE an external YIG oscillator.  Not sure how to use Labview to control the PLL.

0 Kudos
Message 1 of 4
(1,697 Views)

Here is how to use the PLL. But I don't know of how to interact with that device 🙂

 

http://zone.ni.com/devzone/cda/tut/p/id/3781

 

And for thouse who don't know what a PLL is a free bonus link is here:

 

http://digital.ni.com/public.nsf/allkb/07BC8D77D4E9AE258625708B007CE74F?OpenDocument

 

🙂

 

and a second one on what that device is: http://www.hittite.com/products/view.html/view/HMC702LP6CE

 

Now we are all caught up to speed.

Sam S
Applications Engineer
National Instruments
0 Kudos
Message 2 of 4
(1,686 Views)

Hi There, did you have any luck with controlling the Hittite vco using labview?

Any information would be helpful,

Thank you.

 

0 Kudos
Message 3 of 4
(1,169 Views)

Is there anyone in your organization who is experienced with LabVIEW Development?  From the very little information you provided in your question, I suspect you would be best served by someone who could spend the time to learn what all the terms in your Title (which also seem to be your entire Post's message) signify and could understand the system(s) with which you will be working.  You could also check the "LabVIEW Developers Seeking Employment" Forum here.

 

Bob Schor

0 Kudos
Message 4 of 4
(1,166 Views)