LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

I need to calculate the frequency of analog signal

 

I want to calculate frequency of analog signal attached below please help me.

0 Kudos
Message 1 of 8
(798 Views)

You can try to get ideas based on this tutorial: 

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000000x3QeCAI&l=hu-HU

0 Kudos
Message 2 of 8
(783 Views)

It is quite obvious that there is a major frequency component with a wavelength of about 30 x-units, but there are of course significant other frequencies. There is a gigantic DC offset, so the most dominant frequency is 0Hz from just looking at it.

 

To get frequencies, we first need to know all the units. Looks like you are just graphing with dt=1. Do you know the real point spacing?

 

If you are only interested in the major oscillation, maybe "extract single tone" would be all you need.

0 Kudos
Message 3 of 8
(743 Views)

Sir is a graph of displacement of poker so i need to calculate frequency of every signal not only major oscillations.

0 Kudos
Message 4 of 8
(722 Views)

So frequencies, not frequency then. Start by attaching some typical data.

 

  • Are you showing us the entire signal or just a fraction?
  • Can frequencies change over time?
  • What does the data represent?
  • What do the frequencies mean?
  • What is a poker?
  • Are you also interested in phase information?
0 Kudos
Message 5 of 8
(714 Views)

1. Its a fraction of signal

2.frequency change over time

3.Data represent displacement

4.overall frequency of signal

5.poker is vibrator used in constructions,

6.im not interested in phase information

0 Kudos
Message 6 of 8
(701 Views)

This is my Vi.

0 Kudos
Message 7 of 8
(697 Views)

this is my vi.

0 Kudos
Message 8 of 8
(696 Views)