LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

I need help please!!

Solved!
Go to solution

Show us a screen grab of your Windows Device Manager and NI-MAX like I posted above.

========================
=== Engineer Ambiguously ===
========================
0 Kudos
Message 11 of 12
(473 Views)
Solution
Accepted by Ozvaldo5

Try to make sure your Device Drivers / NI VISA is Installed Properly in your system. LabVIEW Should be able to detect the plugged in Ports when all the drivers are installed Properly.

Try to share the snippet of NI MAX Driver details/ Device manager Details.

----------------------------------------------------------------------------------------------------------------
Palanivel Thiruvenkadam | பழனிவேல் திருவெங்கடம்
LabVIEW™ Champion |Certified LabVIEW™ Architect |Certified TestStand Developer

Kidlin's Law -If you can write the problem down clearly then the matter is half solved.
-----------------------------------------------------------------------------------------------------------------
0 Kudos
Message 12 of 12
(448 Views)