I need help: Labview crashed after 30000 sec.

[wilken]

We are controlling with Labview a calorimeter. During the measurement a
error message occurred every time after ca. 30000 sec. and Labview
crashed.



LABVIEW caused an invalid page fault in
module NIPALU.DLL at 015f:1f802bb8.
Registers:
EAX=00000000 CS=015f EIP=1f802bb8 EFLGS=00010246
EBX=0176fb9c SS=0167 ESP=0176fb48 EBP=8341e6e0
ECX=83cf2130 DS=0167 ESI=83cf2130 FS=2ecf
EDX=bffc9490 ES=0167 EDI=83e10574 GS=0000
Bytes at CS:EIP:
8b 30 eb 07 33 f6 eb 03 8b 77 04 85 ff 74 0d 8b
Stack dump:
00000001 83cf2130 1f803f08 00002710 1f80dc34 00000001 1f8160e8 00000001
8341e7e0 8341e7e0 ffff3b50 00000000 00000000 83e16280 01321fac 1f803d34

Can anybody help us or had the same problems?

thanks Michael

[BruceBowler]

Any chance it's actually ca. 32767 seconds?

wilken wrote:
>
> We are controlling with Labview a calorimeter. During the measurement a
> error message occurred every time after ca. 30000 sec. and Labview
> crashed.
>

[Greg_McKaskle2]

> We are controlling with Labview a calorimeter. During the measurement a
> error message occurred every time after ca. 30000 sec. and Labview
> crashed.
>
> LABVIEW caused an invalid page fault in
> module NIPALU.DLL at 015f:1f802bb8.
> Registers:
> EAX=00000000 CS=015f EIP=1f802bb8 EFLGS=00010246
> EBX=0176fb9c SS=0167 ESP=0176fb48 EBP=8341e6e0
> ECX=83cf2130 DS=0167 ESI=83cf2130 FS=2ecf
> EDX=bffc9490 ES=0167 EDI=83e10574 GS=0000
> Bytes at CS:EIP:
> 8b 30 eb 07 33 f6 eb 03 8b 77 04 85 ff 74 0d 8b
> Stack dump:
> 00000001 83cf2130 1f803f08 00002710 1f80dc34 00000001 1f8160e8 00000001
> 8341e7e0 8341e7e0 ffff3b50 00000000 00000000 83e16280 01321fac 1f803d34
>

You should contact tech support or download the latest version of NI-DAQ.
NI-PAL isn't really a part of LV
, but it is a part of most NI driver SW.
You don't mention what type of I/O you are doing, but I assume its DAQ.

Greg McKaskle