From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
The motor I have is a SLO-SYN Superior Electric (MO61-FD-6002). I need to write or find a VI that will help me step a grating back and forth slowly. Also I have no idea what kind of equipment or drives are required to do so. I would appreciate any help. If any other information is needed please email at mktmoss@grnco.net
Hi,National Instruments does provide add-on motion control tool kits for Labview. The detailed information can be found at: http://sine.ni.com/apps/we/nioc.vp?lang=US&pc=mn&cid=1397 You can also choose to use the National Instruments Motion Controllers. I also found previous discussions on the developer zone which are very helpful: http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=5065000000080000001D2C0000&ECategory=Motion
If you use some third party motion controller, make sure they have drivers for LabVIEW and the version is correct. If there is further question, just reply to this post and I will be notified.
