06-21-2019 07:40 AM
Hello David,
I need to comunicate with a Siemens gas analyzer (ULTRAMAT 6E) through ELAN protocol.
I understood you have an ELAN Labview library that works very well.
Could you send me the code?
My email is sergio.romagnoli@sintechnology.com
Thanks in advance,
Sergio
01-21-2020 01:50 PM
Hi David,
I am troubleshooting my own driver and would greatly appreciate if you could send your implementation to ericruud at gmail dot com. Thanks,
Eric
05-11-2020 08:59 AM
Hi Dave,
I too am one of the lonely soles looking for Ultramat 23 ELAN code. Would you be willing to share? My email is corey.sweatt2@geappliances.com
Thank you
Corey
05-11-2020 11:23 AM
You're hardly lonely - it seems lots of people are doing gas analysis with these venerable instruments (the oldest one we had back at Philips/Respironics was manufactured in 1997).
Sent a zip to your email address. Let me know if I can help with any followup questions - or post to this thread and other helpful folks may get back to you. You should know, I've moved on from Philips/Respironics so I no longer have that hardware with which to interact. But that shouldn't matter.
Dave
09-11-2020 02:03 PM
Hi Savior Dave,
I too am looking for the secrets of LabVIEW serial communication with the ULTRAMAT 23 (and NOxMAT 600) and would appreciate your help (zip). My email address is baboedeker@aosmith.com
-Brett
09-11-2020 02:55 PM
Brett,
Sent you the ELAN driver via an email attachment. Sorry, can't help with the NOXMAT, but someone else in this thread probably can, if they're subscribed.
Dave
10-16-2020 05:48 AM
Hi David,
I hope you still check for updates on this thread. I need to communicate via Labview with an ULTRAMAT 6 for NH3 gas analysis at my university.
Could you please share also with me your precious VIs collection, please?
my email is alfiero.leoni@univaq.it
Thank you so much in advance!
Alfiero
10-16-2020 09:01 AM
Alfiero,
I sent you a zip archive of the library via email. Please let me know you got it and also if you have any problems.
Dave
02-22-2021 11:57 PM
Hello David,
I need to comunicate with a Siemens gas analyzer (ULTRAMAT 23) through ELAN protocol.
I have read you have an ELAN Labview library that works very well.
Could you send me the code?
My email is bekir.calca@ykenerji.com.tr
Thanks in advance,
02-23-2021 10:34 AM
I just wanted to add onto this thread to thank Dave. We're upgrading a lab that tests residential gas furnaces and we're using a Siemens ULTRAMAT 23 analyzer and a couple Alicat flow meters per test station. As with any new project I decided to do a quick search for existing LabVIEW drivers because I'm not interested in reinventing the wheel. I was pleased (and a bit shocked) to find Dave's name pop up for both instruments and he generously supplied his drivers for both instruments (Alicat now actually uses his driver on their website) and helped me with the initial setup for the ULTRAMAT 23, which is not intuitive. The drivers are well written and they saved me a LOT of time. Kudos to Dave!