How to synchronize CRIO multi chassis

[ATBB]

I have two NI-9076 and each populated with NI-9234 DSA ,NI 9870 RS-232(IMU&GPS) and one digital input 9401 modules.How to synchronize CRIO multi chassis with DSA&IMU&GPS Measurements modules. There has to be another method for multi-chassis synchronization for DSA modules.Any idea has this can be done? Thanks. 

[Ryan-C]

Hi there,

That is certainly possible.  Please refer to the following general document regarding synchronization of Real-Time systems using NI-TimeSync: http://www.ni.com/white-paper/11566/en 

As well, the following might be helpful regarding DSA modules more specifically; this uses the Simple TCP/IP Messaging (STM) library: https://www.ni.com/en/support/documentation/supplemental/21/simple-messaging-stm-communication-libra...

Best,