LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

How to remove plot 6, plot 7 and plot 8 from the autopopulate plot menu "Fill Base Line"

Solved!
Go to solution

Is there a way to remove "Plot 6, Plot 7 and Plot 8"?

Test.jpg

 

Thanks.

 

J-M

0 Kudos
Message 1 of 10
(252 Views)

Reduce the number of plots to only the ones you want.

 

Are you by any chance using an "array to cluster" node somewhere in your code? 

 

Ben

0 Kudos
Message 2 of 10
(239 Views)

Yes, I use an "array to cluster" node.  It is in a section I removed for the example Test.vi (I removed almost everything).

 

Array to cluster.jpg

 

How can I reduce the number of plots (I have six)?

 

Thanks.

 

J-M

0 Kudos
Message 3 of 10
(214 Views)
0 Kudos
Message 4 of 10
(207 Views)

I already have a cluster size of 6...

 

J-M

Cluster size of six.JPG

0 Kudos
Message 5 of 10
(196 Views)

Since I do not have access to LV I can only offer a guess.

 

1) Is that cluster you are bundling into have other values not shown in the image?

2) When not running the code try to clear the graph and then right-click and make current the default.

 

Ben 

0 Kudos
Message 6 of 10
(160 Views)

Have you seen this thread?

 

You may be out of luck.

 

mcduff

Message 7 of 10
(151 Views)

mcduff,

 

Unfortunately I think you are right...

 

JM

0 Kudos
Message 8 of 10
(115 Views)
Solution
Accepted by topic author J-Mv2

0# download Test.vi ‏19 KB

1# Read Legend.Plot Minimum (LegPlotMin) = 9

2# Write 6 = Legend.Plot Minimum (LegPlotMin)

3# right click > replace > graph > XY graph

4# result:

reset.png

5# warning: as soon as you increase the legend by dragging your mouse too far, above plot number 6,

there will be a new entry in the list

and you can't reset it!

do it right the first time ... Smiley Sad

I guess, you'd better make this a .ctl

 

still okay:

1.png

you've gone too far:

2.png

 

in the latter case, you can only set the plot name from "Plot 6" to " "

(however there is a property node, I only tested this manually )

than there will be an empty entry in the list

manually " ":

3.png

result:

4.png

 

 

 

 

 

 

Message 9 of 10
(98 Views)

Thanks alexderjuengere, it works perfectly!!!

 

JM

0 Kudos
Message 10 of 10
(78 Views)