12-29-2011 07:52 PM
Hello
I would like to generate the IQ waveform from a sine waveform.
from the graph below
I have read all the materials but i don't seem to be able to convert the sine waveform to IQ waveform to be written to the RFSG.
Any help will be highly appreciated
Best Regards
12-30-2011 11:21 AM
Your image did not show up. Use the little tree icon in the bar immediately above the text body ox when you post. That icon allows you to insert an image directly into to message you post.
Lynn
12-30-2011 12:15 PM
Hello
I will post the picture in 2 hours but if it helps it tis the niRFSG write waveform module.
I can briefly explain;
I have to write a sine waveform using the niRFSG write module. I will need to transform the sine into a IQ complex data for this purpose. is this possible?
thank you
12-30-2011 12:25 PM
It should be possible if you are using NI hardware. Look in the example finder of LabVIEW and search for IQ. You should find and example called "RFSG Arbitrary Waveform Generator.vi". This should give you a good start.
12-30-2011 12:59 PM
Hello winnniewanda,
you may take a look to this other DF:
How to convert waveform data to IQ data?
Please read the answer from the engineer fron NI UK, I believe this will give an idea about the math to perform the conversion between waveforms.
Warm regards
Mart G.
12-30-2011 03:57 PM
thank you again for the quick response.
I looked at the example, but it seems both the I and the Q are the same. are they suppose to be the same?
thanks again
12-30-2011 06:30 PM
Here is the picture of the module that I would like to use
Thanks again for all your inputs