LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

How do I execute blocks sequentially that aren't connected?

 

Dear LabVIEW,
I would like to execute these "JPEGs" sequentially, but I don't really need to pass data between them, so I made up some data to pass around. There must be a better way to do this. How?
Sincerely,
A frustrated LabVIEW user.

 

0 Kudos
Message 1 of 4
(2,688 Views)

You don't need to pass data from one to the other because you are using a flat sequence structure.  The frames will execute in the order that is laid out.  You need data passing only if you don't use the sequence structure.

- tbob

Inventor of the WORM Global
0 Kudos
Message 2 of 4
(2,677 Views)

My bad. It appears I had a race condition elsewhere in the program, and I though this was the cause of the erroneous behavior I was experiencing.

 

Good to know that these film-strip thingies work without input being passed around.

0 Kudos
Message 3 of 4
(2,662 Views)

Actually, those film strip thingies are considered to be bad programming practice.  What if you have an error and need to break out from a frame in the middle to handle the error?  There is no way to do it with sequence structures.  You should consider using a state machine.  There are many examples of state machines if you search for them.  Don't wait for some drastic problem to happen.  Switch to a state machine now and forget about those film strip thingies.

- tbob

Inventor of the WORM Global
Message 4 of 4
(2,635 Views)