12-29-2011 02:32 PM
Hi,
This question is supposed to be answered here.
http://digital.ni.com/public.nsf/allkb/CB109EC8325252A18625735B0049830B
where it points to the example file
However, this file is not there at the above link. Would appreciate if someone can share this program with me or any other advise.
Thanks,
Pulkit
Solved! Go to Solution.
12-29-2011 03:15 PM
I am attaching a VI that does this if you provide the path of the VI you want to launch dynamically (LV 8.5).
HTH.
PS: if the VI is already opened, it just brings it to the front (you may want that, if not, just remove that case and the corresponding test).
12-29-2011 03:22 PM
BTW, you may want to try and contact NI and tell them about the dead link. Good luck with that, though...
12-30-2011 03:36 PM
Hi pulkit_umn,
Unfortunately the "Using VI Server to Call SubVIs that Run Parallel and Independently of the Calling VI" is no longer available. It looks like the community example in the KB demonstrates the functionality and the VI from X. shows the idea in a concise manner. A request to remove the broken link has been submitted. Sorry for the inconvenience.
12-30-2011 04:52 PM
Thanks for the responses