LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

Having prolem with CRIO

Solved!
Go to solution

Hi guys,

I'm using Compact RIO9066 and NI C series module 9205 and 9264 to do the measurement in the project.

I've installed all the software required(Labview2015, Real-Time module 2015, FPGA module 2015 and

CRIO drive devices) and connect the RIO9066 to host computer with USB cable and put NI 9205 and 9264

into the slot of the RIO9066.

The problem is that I can find the CRIO9066 in the MAX but cannot find the NI 9205 and 9264, I don't know 

what's going on there. 

I would appreciate it if anyone could help me!

Regards!

00.PNG

000.jpg

Once for all!
0 Kudos
Message 1 of 2
(1,344 Views)
Solution
Accepted by topic author Vidasll

Hi Vidasll,

 

you don't find any modules in MAX.

You will find them in your LabVIEW project once you included your cRIO target in the project…

 

Hint: Use a red wire for Vsup of your power supply… 😄

Best regards,
GerdW

using LV2011SP1 + LV2017 (+LV2020 sometimes) on Win10+cRIO
0 Kudos
Message 2 of 2
(1,326 Views)