LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

Getting error -10008 with DAQCard-1200 and Mac OS 9.1 for Digital I/O, not with 9.0.4 using LV 5.0.1?

I get error -10008 with DAQCard-1200 using any digital I/O vi since I updated the OS to 9.1. Am using latest version (6.6) of NI-DAQ for Mac. On another powerbook with 9.0.4 I don't get the error. I don't get error using analog I/O on either computer. I did not get error prior to 9.1 upgrade, CarbonLib upgrade...
0 Kudos
Message 1 of 4
(2,455 Views)
When you test your digital I/O in the NI-DAQ Configuration Utility Test Panels, do you get the error? What LabVIEW examples do you run that give you the error? Those examples are in the LabVIEW >> Examples >> Daq >> digital directory. Try physically removing the card and installing the card fresh. Make sure that you have followed the steps to install according to the DAQ Support pages at:

http://www.ni.com/support/daq

Then, try the Test Panels and the examples.

Regards,

Geneva L.
Applications Engineer
National Instruments
http://www.ni.com/ask
0 Kudos
Message 2 of 4
(2,455 Views)
Please contact me, I'm running a DAQCard1200 on a G4 under 9.1 and analog IO Vi's as well as the digital IO are not available.
Pannel test is fine.

St_bernhards@hotmail.com
0 Kudos
Message 3 of 4
(2,455 Views)
I noticed your posting. Note that this forum is meant for public postings. If you still need support assistance, and would like to directly interact with an Applications Engineer, please go to the http://www.ni.com/support pages and click on the Request Support link.

Regards,
Geneva L.
Applications Engineer
National Instruments
http://www.ni.com/support
0 Kudos
Message 4 of 4
(2,455 Views)