From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
03-01-2018 01:50 PM
I am Having an error code -1074118656 and the message saying that the error occurred at niDMM Initialize.vi. The driver is working good in NIMAX . The front panel of the DMM is working good in the NIMAX.
Solved! Go to Solution.
03-02-2018 09:41 AM - edited 03-02-2018 09:48 AM
Most "Initialize" VI's have two options "Reset" and "ID Querry", and most times these options are enabled by default.
If your instrument identifies even slightly different than what the VI is looking for (like model#) it will fail the ID querry and probably give an error similar to what you are seeing
03-02-2018 10:40 AM
how I can check that? I cannot find the DMM initialize.VI
03-02-2018 11:16 AM - edited 03-02-2018 11:17 AM
It's not part of your program?
http://zone.ni.com/reference/en-XX/help/370384N-01/dmmviref/nidmm_initialize/
03-02-2018 03:46 PM
I am not the programmer of this software plus I am new self learning LabVIEW and I need to get this working.
03-02-2018 03:58 PM
Usually if you stop the program when the error occurs LabVIEW will open the block diagram and highlight the part in the code that had the error.
Other than that you could use the "Find and Replace" function on the block diagram to find the VI.
Find and Replace is in the Edit menu.
03-29-2018 09:00 AM
Thank you all for your time and consideration. I did find the issue and the solution was that the global destination for the DMM was incorrect so I changed it and saved it all.
03-29-2018 11:46 AM
Whats a "global destination"?
03-29-2018 11:49 AM
it is the path or the VISA for the DMM was entered as a global destination path.
03-29-2018 11:55 AM
Oh, you mean the VISA resource?
Like the com port or GPIB address?