03-07-2012 08:02 AM
Hello all,
I'm currently creating a program which creates several tests concerning Power Quality with a Daqmx PXI-4461.
First of all i would like to say that i have no problem generating or reading signals with the Daqmx.
I'm currently at the point where I want to generate a flickering squarewave signal (flickering = small voltage dips over time) with the Daqmx, and was wondering if there was an example somewhere on the web that lets me insert the flickerfrequency and % decrease compared to the RMS value
Like a good professor of mine always said, its better to edit an excisting example then to start from scratch!
Regards,
Dennis
03-11-2012 05:32 PM
Hello Dennis
I didn't directly find directly usable code, but I did find something else:
https://decibel.ni.com/content/docs/DOC-12324
http://sine.ni.com/cs/app/doc/p/id/cs-13888
I think that especially the first document could help you a bit further.
Another thing you could try is contacting the author of the case study to request if he can send you his code.