From 11:00 PM CDT Friday, Nov 8 - 2:30 PM CDT Saturday, Nov 9, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From 11:00 PM CDT Friday, Nov 8 - 2:30 PM CDT Saturday, Nov 9, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
02-12-2014 11:17 AM
Hi,
I'm trying to learn about debugging FPGA code and I'm reading http://forums.ni.com/t5/forums/postpage/board-id/170/submitted/true?message-subject=tach_fpga
I want to follow the tutorial in section 3, but it uses Tach_FPGA.vi which I can't find for the life of me. I have found Tach_1904.vi, which is different.
Can someone point me to the VI or if I'm looking an outdated tutorial, point me to the most up to date one on Desktop Execution Node/FPGA Test Benches.
Thanks
Solved! Go to Solution.
02-13-2014 10:09 AM
Hi Toebutter,
I am sorry that I cannot open the link your povided in your link. Could you please repost it again.
Also, why dont you try some other tutorials?
"Efficient Development and Debugging with LabVIEW FPGA":
http://www.ni.com/white-paper/7445/en/
"Testing and Debugging LabVIEW FPGA Code":
Thank you.
Regards,
Lanxi
02-13-2014 10:17 AM - edited 02-13-2014 10:18 AM
Thanks Lanxi! Those links of yours do the trick- I think I was looking at an outdated tutorial. I'll even let you off for calling me 'toebutter'
P.S. For anyone else interested, in the LabVIEW help I also found a tutorial titled 'Tutorial:Creating Test Benches (FPGA Module)'