05-15-2019 04:39 AM
I've connected the USB on the Crio , I'm not able to find the USB drive on the PC. Or is it like that ? And I should just concentrate on the path to save ?
05-15-2019 04:44 AM
The VI I'm looking at is this one:
If that's what you're talking about, then connecting
If you want to use a Graph (not a Chart), then you'll need to store the historic data too (like you're doing with the 2D array going to the "Array" output.
You could either
That would be more complicated than directly using a Chart though...
05-15-2019 04:45 AM
Hi Zaqf,
I've connected the USB on the Crio , I'm not able to find the USB drive on the PC.
When you connect that USB thumb drive to the cRIO you will NOT get any new drives on your host PC! You need to check for drives on the cRIO! (Again: The cRIO is a computer of its own!)
Try to use the ListFolders function on the cRIO to get all available drives…
05-15-2019 05:01 AM
This is the VI. I've just used one Daqmx function with two channels .
05-15-2019 01:16 PM
Delete the Waveform graph and put in a Waveform Chart.
(Have you taken any of the tutorials? Do you understand the difference between a graph and a chart?)
06-13-2019 09:10 AM
I've been using the waveform chart all this while , but I'm not able to get a continuous graph line after 1038 seconds as the chart is being cut/ discontinous.
Is there a way to get a continuous graph on a waveform. Chart for more than 1038 seconds.
I tried changing the settings to max limit above 1038 , and it's defaulting back to 1038.
06-13-2019 11:48 AM
I am puzzled why you are having trouble. Here is a demo of a 4-channel DAQ device (inner 4 loop) running at 100 Hz (wait time of 10 ms) that I ran for >10,000 samples without a problem.
Bob Schor
06-14-2019 08:34 AM
Here's the VI , with which I'm getting a discontinous graph after 1038 seconds . I really don't get the reason why I cant get the graph of the whole time period with the adjusted scale .
Thank you for your precious time.
06-14-2019 09:47 AM
06-14-2019 09:54 AM
Discontinous as in after stopping the pgm , only a part of the graph is visible , rest of the graph vanishes after stopping. I think a waveform graph would solve the issue ? How would I get a waveform chart with discrete output ?
Thank you