Experience with parameter analyser HP

[Kristof Poppe]

Who has some experience with a HP paramter analyse, linked with a PC
trough Labview ?
I need to set up an interface between an HP4145A and PC trough GPIB
interface.
Does anybody has some tips, sample code, additional information,...??

Thanks in advance !!

Kristof
Belgium

[Mikhail]

Look on the NI site: http://www.ni.com - Downloads - Instrument Driver
Network - Downloads, etc.

Direct address:

http://zone.ni.com/idnet97.nsf/9b2b33e1993d877786256436006ec498/8b48a562db25
5488862568ab005fb9a2?OpenDocument

There are two examples in the set.

Regards,

Mikhail

[Kristof Poppe]

I already downed the HP4145B driver, but I can send with this driver command,
but I can't read a thing from the analyser.

"Mikhail A. Nagoga" wrote:

> Look on the NI site: http://www.ni.com - Downloads - Instrument Driver
> Network - Downloads, etc.
>
> Direct address:
>
> http://zone.ni.com/idnet97.nsf/9b2b33e1993d877786256436006ec498/8b48a562db25
> 5488862568ab005fb9a2?OpenDocument
>
> There are two examples in the set.
>
> Regards,
>
> Mikhail

[acostache3558@home.com]

I remember that this type of HP products works just with one of the two NI
programming sets (I used NI DLLs with Visual Basic - not LV). If you use
functions (NI488) try to use subs (NI488.2) or vice versa.


"Kristof Poppe" wrote in message
news:3A96242C.2ECC9B07@sipex.be...
> I already downed the HP4145B driver, but I can send with this driver
command,
> but I can't read a thing from the analyser.
>
> "Mikhail A. Nagoga" wrote:
>
> > Look on the NI site: http://www.ni.com - Downloads - Instrument Driver
> > Network - Downloads, etc.
> >
> > Direct address:
> >
> >
http://zone.ni.com/idnet97.nsf/9b2b33e1993d877786256436006ec498/8b48a562db25
> > 5488862568ab005fb9a2?OpenDocument
> >
> > There are two examples in the set.

> >
> > Regards,
> >
> > Mikhail
>