From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

Error Code: -1073807246 Source:Property Node (arg 1) in VISA Configure Serial Port (Instr).vi Urgent!

Problem Description: One C++ Software Called one LabVIEW DLL. The DLL is operationg one MCU by COM6 on the main board of one industry computer. If end the C++ software by task manager, now the COM6 is not closed.
A:I try to start up one LabVIEW EXE to open the COM6 created with one NI official VI "VISA Configure Serial Port (Instr).vi", the following error ocurred.


Error Code: -1073807246
Source:Property Node (arg 1) in VISA Configure Serial Port (Instr).vi


B:use the 2nd C++ software to open COM6 ok.
C:use MSComm to open COM6 ok.
D:use the 1st C++ software to open COM6 ok.

E:add the VISA close 2 times bofore open to LabVIEW EXE software, also open COM6 failed.
F:use the LabVIEW EXE to open COM6 NG after logout the computer, the error is the same with above.
G: I can use the LabVIEW EXE to open COM6 ok must after restart the computer.
How can I use the LabVIEW EXE to open COM6 ok without restart the computer?

 

LabVIEW Version: 2014(32bit)

NI-VISA Runtime: 14.0.0

 

Urgent! Thanks a lot.

Download All
0 Kudos
Message 1 of 1
(425 Views)