My current application has two redundant applications, each on a seperate front panel tab. I want to be able to monitor the thermocouple temp on one or both high temp furnaces. Everyhting works perfectly for one furnace, but when I created the second tab and configured it the same way, there is a problem. One thermocouple is listed as Dev1/ai0, while the other is listed as Dev1/ai1. I'm using an NI cRIO-9211 Thermocouple Module, which has 4 thermocouple inputs. I assumed that I could address different inputs on the same device without causing any problems, but it appears not. Whichever of the two DAQmx Start Task VIs occurs second causes the above-mentioned error. I know there must be a more refined way of running the two thermocouples simultaneously, but I went with the most obvious to me at the time. ANYWAY, can ANYONE offer advice on eliminating this appparent resource conflict?