LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

Display the measurement from oscilloscope to computer screen

Hello Everyone,

 

I have agilent osilloscope and generator. Also ı download the devices drivers. I just need tha mesaure a signal data with osilloscope and ı display the osilloscope data to my computer screen. How should ı do this program ? How can ı find exampla program? My English little bad ı can't find the example code from ni, which key words should ı use?If you have any URL, may you please share with me? I know this is very basic program but ı can't handle it ?

 

Thank you for your time 🙂

 

0 Kudos
Message 1 of 41
(4,385 Views)

There should be examples with your drivers.


GCentral
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
"Not that we are sufficient in ourselves to claim anything as coming from us, but our sufficiency is from God" - 2 Corinthians 3:5
0 Kudos
Message 2 of 41
(4,374 Views)
What model of Keysight scope? Agilent hasn't existed as a scope vendor in a while.

If you downloaded a project style driver, the examples are with the rest of the LabVIEW examples - Help> Find Examples.
0 Kudos
Message 3 of 41
(4,360 Views)

DSO-X 3014A .ı try several time but  every time ı got attachment warning. 

 

 

 anil.1.PNG

0 Kudos
Message 4 of 41
(4,352 Views)
You'll get that if the scope does not trigger and acquire a signal.
0 Kudos
Message 5 of 41
(4,345 Views)

It hasn't been that long since Agilent became Keysight.  Like, under a year?

Bill
CLD
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.
Humble author of the CLAD Nugget.
0 Kudos
Message 6 of 41
(4,342 Views)

Excuse me sir. I did't understand . What should ı do for solving this problem ?

0 Kudos
Message 7 of 41
(4,338 Views)
True but long enough and publicised enough that I would have thought most technical people were aware of it.
0 Kudos
Message 8 of 41
(4,335 Views)
Start by making sure you can manually capture a signal.
Message 9 of 41
(4,331 Views)

Then set up the driver to mimic what you did manually.

 

 

[edited for clarity]

Bill
CLD
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.
Humble author of the CLAD Nugget.
0 Kudos
Message 10 of 41
(4,324 Views)