From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
06-20-2016 03:34 AM
Hello All,
I have a problem with ic gates program, how these combine it with the value knob on labview program
This program have a 3 value but with 1 indicator,
I want to build,
Knob 1. When the knob value is greater or equal 0>= lamp on, when value greater or equal >=5 lamp off, and when value greater or equal >= 9 lamp on again,
Knob 2. When the knob value is greater or equal 0>= lamp off, when value greater or equal >=5 lamp on, and when value greater or equal >= 9 lamp off again,
I waiting your help guys,
im use 2013 labview version
Thank,
Stewkidz
Solved! Go to Solution.
06-20-2016 03:53 AM
Use In Range and Coerce Function or boolean functions
06-20-2016 05:21 AM - edited 06-20-2016 05:21 AM
As was said, the In Range And Coerce with another comparison and an OR will get you there.
06-20-2016 05:21 AM
@StewKidz wrote:Hello All,
I have a problem with ic gates program, how these combine it with the value knob on labview program
This program have a 3 value but with 1 indicator,
I want to build,
Knob 1. When the knob value is greater or equal 0>= lamp on, when value greater or equal >=5 lamp off, and when value greater or equal >= 9 lamp on again,
Knob 2. When the knob value is greater or equal 0>= lamp off, when value greater or equal >=5 lamp on, and when value greater or equal >= 9 lamp off again,
I waiting your help guys,
im use 2013 labview version
Thank,
Stewkidz
First set the priority and Use between three Points
Use Select switch and Feed Boolean Inputs to decide ON or OFF
06-20-2016 05:55 AM
Mr Artem.SPb and Mr Crossrulz
Thanks you very much for your help,
Before i build it with"formula node"
Now the program is so simply with "In Range and Coerce Function"
Thank,
Stew kidz
06-20-2016 05:59 AM - edited 06-20-2016 06:01 AM