# LabVIEW

cancel
Showing results for
Did you mean:

Solved!
Go to solution

## Design 3 value with 1 indicator

Hello All,

I have a problem with ic gates program, how these combine it with the value knob on labview program

This program have a 3 value but with 1 indicator,

I want to build,

Knob 1. When the knob value is greater or equal 0>= lamp on, when value greater or equal >=5 lamp off, and when value greater or equal  >= 9 lamp on again,

Knob 2. When the knob value is greater or equal 0>= lamp off, when value greater or equal >=5 lamp on, and when value greater or equal  >= 9 lamp off again,

im use 2013 labview version

Thank,

Stewkidz

Message 1 of 6
(1,732 Views)
Solution
Accepted by topic author StewKidz

## Re: Design 3 value with 1 indicator

Use In Range and Coerce Function or boolean functions

Message 2 of 6
(1,725 Views)
Solution
Accepted by topic author StewKidz

## Re: Design 3 value with 1 indicator

As was said, the In Range And Coerce with another comparison and an OR will get you there.

There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
"Not that we are sufficient in ourselves to claim anything as coming from us, but our sufficiency is from God" - 2 Corinthians 3:5
Message 3 of 6
(1,713 Views)

## Re: Design 3 value with 1 indicator

@StewKidz wrote:

Hello All,

I have a problem with ic gates program, how these combine it with the value knob on labview program

This program have a 3 value but with 1 indicator,

I want to build,

Knob 1. When the knob value is greater or equal 0>= lamp on, when value greater or equal >=5 lamp off, and when value greater or equal  >= 9 lamp on again,

Knob 2. When the knob value is greater or equal 0>= lamp off, when value greater or equal >=5 lamp on, and when value greater or equal  >= 9 lamp off again,

im use 2013 labview version

Thank,

Stewkidz

First set the priority and Use  between three Points

Use Select switch and Feed Boolean Inputs to decide ON or OFF

CLA|| CTD
Message 4 of 6
(1,712 Views)

## Re: Design 3 value with 1 indicator

Mr Artem.SPb and Mr Crossrulz

Thanks you very much for your help,

Before i build it with"formula node"

Now the program is so simply with "In Range and Coerce Function

Thank,

Stew kidz

Message 5 of 6
(1,701 Views)

## Re: Design 3 value with 1 indicator

Go through the attached sloution. it may helps you.....

Message 6 of 6
(1,684 Views)