LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

Daq Triggering after Fieldpoint Activation

Hi,hope someone can help.. i'm lost on this now..basically i want to do this:
 
activate fieldpoint to pump stepping current-starting from 0 mA(from 0-10mA in steps of 1mA) ==> after 0.5s ==> DAQ card is triggered and will record the reading ==> fieldpoint steps to 1mA ==> after 0.5s ==>DAQ triggered and record the readings ==> REPEAT till 10mA.
Is there any examples VIs or icons which will help me to acheive this?
 
Appreciate a lot for the help=D
 
 

Message Edited by SG_SP_OLED on 09-29-2006 02:20 AM

0 Kudos
Message 1 of 2
(1,353 Views)

Greetings!
     There is a shipping example in LabVIEW 8.2 with the latest fieldpoint drivers and the NI cFP-AO-200. Please refer to the attachment to the location in the example finder that you can find the example from. Also in DAQ to measure current, you will have use a resistor. Please refer to the link below -

http://zone.ni.com/reference/en-XX/help/371361B-01/lvmeasapps/measuring_current/

http://digital.ni.com/public.nsf/websearch/82508CD693197EA68625629700677B70?OpenDocument

http://digital.ni.com/public.nsf/websearch/29534F94B158054486256B490059E3AD?OpenDocument

http://digital.ni.com/public.nsf/websearch/4017793371AC28478625706800531CBE?OpenDocument

Thanks and hope this helps
Best regards
Avi Harjani




0 Kudos
Message 2 of 2
(1,336 Views)