Create FPGA project without NI board

[Mejdi]

Hello,
Is it possible to create an FPGA project without having R series board connected?
Can this project be run in emulation mode?

I followind the NI knwoledge base here: http://digital.ni.com/public.nsf/allkb/F466AD83D24F041D8625714900709583 
But it doesn't work:

Thank you,

[Sam_Sharp]

Do you have the LabVIEW FPGA toolkit and NI-RIO drivers installed? It looks like you don't have the support for RIO/FPGA devices installed.

I have a lot more items listed under Add Targets and Devices.

Have a look in MAX and see if you have NI-RIO, NI R Series Multifunction RIO and FPGA (under your LabVIEW version) listed.

[Mejdi]

here what I have in MAX:

What next?

[Sam_Sharp]

The version of RIO you have installed is very old so probably isn't compatible with LabVIEW 2013 - it was released in 2009. I suggest updating to the latest version for LabVIEW 2013 - I think it is RIO 13.

This should be the link to download: http://www.ni.com/download/ni-rio-13.1/4572/en/

If you expand the LabVIEW 2013 f1 item - does it show FPGA?