Re : Controlling LabVIEW program for MCP BR2827 LCR meter

[chamslo]

Hello,

I'm looking for LabVIEW controlling program for MCP BR2827 LCR meter

if someone can help I will be grateful,

Thank you very much

[sabri.jatlaoui]

Hello Chamslo,

To control this kind of device, you'll have to use RS-232 or GPIB port.

In order to do so, LabVIEW give you access to VISA API.

You'll find below a white paper talking about instrument control

http://www.ni.com/white-paper/3511/en/

Here are some examples.

http://search.ni.com/nisearch/app/main/p/bot/no/ap/tech/lang/en/pg/1/sn/catnav:ex/q/visa/

Best regards,

[chamslo]

Dear Sabri,

thank you for your kind reply,

actually I'm looking if someone has already done the program so that will save me time,

Thanks a lot

[sabri.jatlaoui]

Chamslo,

You should try Visa example.

Which port are you using to control your device?

Best regards.

[chamslo]

it is GPIB port

[sabri.jatlaoui]

Il vous faut alors une interface matérielle GPIB.

Vous pouvez installer le driver NI 488.2 qui vous donnera accès aux exemples NI de contrôle d'instruments par GPIB.

http://www.ni.com/download/ni-488.2-3.1/3619/fr/

Cordialement.