02-14-2006 07:23 AM
02-14-2006 07:45 PM
09-19-2011 10:40 AM
Hi
I'm also try to connect the device via usb. but I got error in the "visa io name" that I take from the device usb id
could you please let me know How you did it finally?
Thank
Tomer
09-20-2011 12:25 AM
First, you posted to an old and unrelated thread. Second, you really need to provide the specific error code.
09-20-2011 11:23 AM
Sorry , I didn't want to open new discussion...
The error code is - 1073807343
Thank you in advance
Tomer
09-20-2011 01:19 PM - edited 09-20-2011 01:20 PM
Are you selecting from thr VISA Resource pull-down menu or typing it in? Does the instrument appear in MAX and windows device manager as USBTMC?
09-20-2011 02:30 PM
Thank you very much
Tomer
09-20-2011 03:19 PM
Typing the id is not correct. In order to be used in LabVIEW, an instrument has to be USBTMC (Test and Measurement Class). The windows device driver should also reflect this.
09-21-2011 11:58 AM
Thank you
How I check if the device is USBTMC ? ( B.T.W , iIn the NI website , they listed USB as one of the interfaces option for the device - Does this imply that the device is USBTMC? )
09-21-2011 01:38 PM
Lets start with the basics. Did you install the software that came with the instrument?