From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
04-11-2013 02:37 AM - edited 04-11-2013 02:42 AM
Hello.
I've created a VI to compare measure. I begin with a simple button.
I want to replace the button with data collected on a myDAQ. But reading data on myDAQ sent flow of data, and I need to only one value ? How extract une value from the flow ?
Pascal
Solved! Go to Solution.
04-11-2013 03:49 AM
Hello,
When you configure your DAQ assistant, you need to set the assistant to 1 Sample (On Demand) in the configuration panel as shown in the screen shot
Regards,
04-11-2013 04:27 AM
Hello
It's already so...
Pascal
04-11-2013 04:38 AM
A precision :
Pasal
04-11-2013 04:57 AM
Hi Pascal, see the attached VI (older version, but should open).
Place your daq assistant as indicated and see the results.
Hope this is what you are looking for.
Regards, W
P.S. I could not resist to show an alternative for your case structure
04-11-2013 07:39 AM
Nice !
Thank's a lot!