Communicate with Delta PLC (DVP28SV) using Labview over TCPIP ethernet

[surya_urja]

Hi,

I want to communicate with a Delta (DVP-28SV) PLC over TCP/IP Ethernet using Labview.

Labview does have a OPC server (with SCADA module) but I do not want to use it.

Regards,

Ram Prakash

[Puneet_K]

Here is supported device list : http://zone.ni.com/devzone/cda/tut/p/id/6417

Starting point for OPC Server :  http://zone.ni.com/devzone/cda/tut/p/id/7450

[surya_urja]

thank you for your response but I want to do this without using an OPC server.

[Puneet_K]

My Mistake.

In this case, you can use Modbus Library for ethernet or serial interface to communicate with PLC.

http://zone.ni.com/devzone/cda/epd/p/id/4756

[logikart9944!]

Hello Everyone,

                              Me having a question Can we able to communicate with Delta PLC without Lookout server is it possible, i need a direct Communication between Labview and PLC Using TCP/IP 

If Possible please help me ......

[mohabkh1995]

if you knowned how Communicate with Delta PLC (DVP28SV) using Labview over TCPIP ethernet tell me