LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

Communicate mit GoPro

Solved!
Go to solution
Highlighted

Hello,

 

I have find a way to communicate with GoPro, so that I can take pictures and videos with LabVIEW application. But I am confused with the following information:

Unbenannt.PNG

 

how can I send the magic packet? I have tried with TCP/IP, but how can I send the Subnet Mask?

Best Regard

0 Kudos
Message 1 of 10
(3,413 Views)
Highlighted
Solution
Accepted by topic author TUDarmstadtLLX

You don't send a subnet mask.

 

The subnet mask is used by your local computer so it can only "hear and see" IP addresses that are not masked out.

 

(or something like that)

-------------------------------------------------------------------
Unfortunately, most readers of this Forum, including some real Experts, have not mastered the skill of being able to read the code that Posters fail to post. If we cannot see "what you did wrong", we are unable to tell you how to fix it. (Bob Schor 28 August 2018)
Message 2 of 10
(3,372 Views)
Highlighted
Hi @TUDarmstadtLLX
You were able to get GoPro to work with LabVIEW?
-Could you share the steps followed?
Thanks
uday
0 Kudos
Message 3 of 10
(3,344 Views)
Highlighted

Hi, I have found the http command list for GoPro. I have used these command to setup GoPro5, such as change the frame pro second, power off. But I have not found the command to take a picture or video. From the post of others, I got the information that before I send the command to the GoPro to take a picture, I need to send the Magic Packet. I will try it today. If I make it, I will share my code.

 

The http command list is here

 

Best regard

Message 4 of 10
(3,338 Views)
Highlighted

Hi,

 

I can use the http command to set the camera, but I still can not control the camera to shoot video or take picture.

 

Best regard

0 Kudos
Message 5 of 10
(3,301 Views)
Highlighted
Solution
Accepted by topic author TUDarmstadtLLX

Hi,

 

I guess I have found the solution. I have successfully controlled the GoPro Session 5 with Python API. This API can be found in GitHub.

 

LabVIEW have a VI, which can implement the python script. The detail can be found here. I want to test it, but my GoPro is suddenly broken.

 

Best regard

Message 6 of 10
(3,251 Views)
Highlighted
Solution
Accepted by topic author TUDarmstadtLLX

I have used Python with LabVIEW to control the camera to take photos and shoot videos.

Message 7 of 10
(3,212 Views)
Highlighted

Nice! Is it possible to save at least 10 shots per second with LV control ?

0 Kudos
Message 8 of 10
(3,068 Views)
Highlighted

Hi,

 

under the "Burst Mode", you can take up to 30 photos pro second. But the LabVIEW program needs to be changed.

 

Best Regards.

0 Kudos
Message 9 of 10
(3,048 Views)
Highlighted

Hello,

 

Is there possible to sync and trigger multiple GoPros say four GoPro 6s together using Labview?

If yes, please I need your help. I have several instruments and I am able to sync them all together except GoPros.

 

Best Regards,

AMANJ

0 Kudos
Message 10 of 10
(2,554 Views)