LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

Code for vending machine

Solved!
Go to solution

Sir,

     I would like know the code for a vending machine which has x no of items and accepts any change and at the same time returns the excess change back to the customer.

           Thanking sir.

0 Kudos
Message 1 of 21
(4,480 Views)
Solution
Accepted by topic author vendingmachine

State Machine.

 

Are you looking for somebody to just do this for you?  Or are you just stuck somewhere?  What have you tried?


GCentral
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
0 Kudos
Message 2 of 21
(4,474 Views)
Highlighted

if code is readily available i will go through it and try it

 


@crossrulz wrote:

State Machine.

 

Are you looking for somebody to just do this for you?  Or are you just stuck somewhere?  What have you tried?


 

0 Kudos
Message 3 of 21
(4,469 Views)

i tried a vending machine which does not give change and acpets only the exact chnge so i would like to modify it if someone guides me

0 Kudos
Message 4 of 21
(4,466 Views)

It doesn't seem like your problem is really solved.  So you might want to unmark my earlier post as the solution and give me a Kudos instead.

 

Care to share your code?  Tell us where you are stuck.


GCentral
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Message 5 of 21
(4,457 Views)

Are you doing this as practice for the CLD? If so you may want to spend time figuring it out on your own since there will not be anyone who can assist on the exam itself.



Mark Yedinak
Certified LabVIEW Architect
LabVIEW Champion

"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot
0 Kudos
Message 6 of 21
(4,452 Views)

could kindly assist me with the code 

0 Kudos
Message 7 of 21
(4,442 Views)

no am not preparing for cld am at the basic level trying to learn labview

 

0 Kudos
Message 8 of 21
(4,440 Views)

@vendingmachine wrote:

could kindly assist me with the code 


You need to show us some code so we know where you are at.


GCentral
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
0 Kudos
Message 9 of 21
(4,428 Views)

If you understand the existing code, it should be trivial to make these changes. Do you understand the code you currently have?

If you show us the original code, maybe we can give you some pointers.


LabVIEW Champion. It all comes together in GCentral GCentral
0 Kudos
Message 10 of 21
(4,428 Views)