07-13-2012 02:36 AM
How can i capture live image from my laptop integrated webcam using LabVIEW ?
Even after installing all the IMAQ drivers, MAX is not displaying my integrated webcam ?
Why is it so ?
do i need to install some additional drivers for this ?
07-13-2012 03:02 AM
I think it is IMAQdx you need to install.
At least it works for me with IMAQdx on my HP laptop :
We have two ears and one mouth so that we can listen twice as much as we speak.
Epictetus
07-13-2012 05:51 AM
Are you using the Integrated webcam of your laptop ?
external webcam is being detected but the integrated camera is not detected even after installing the IMAQdx
07-13-2012 06:04 AM
Yes, this is the integrated camera.
What's your computer?
We have two ears and one mouth so that we can listen twice as much as we speak.
Epictetus
07-13-2012 06:15 AM
it is HP Probook.
07-13-2012 06:20 AM
Hmm.. mine is HP EliteBook 8460p and it work just fine... what version of VAS (Vision Acquisition Software) do you have?
We have two ears and one mouth so that we can listen twice as much as we speak.
Epictetus
07-13-2012 06:28 AM
I am using the device driver software of NI developer suite 2010
04-16-2013 06:06 PM - edited 04-16-2013 06:07 PM
hi, you can use NI Vision Assistant
IDE ofNI Vision Assistant
..select acquire images
...select option 2
...
...select devices: CAM0 (default webcam), video mode resolution
...
...option 1 acquire single, option 2 acquire continuous
04-16-2013 07:14 PM
hi, you can use NI Vision Assistant can also check out the following post on the forum, has example codes that can be useful
http://forums.ni.com/t5/Discussions-au-sujet-des-autres/webCam-USB/m-p/718481/highlight/true#M21725
06-30-2013 02:14 AM
Example using a webcam and the module NI Labview IMAQdx