LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

Can someone please provide me with a simple VI to connect a thermocouple via FieldPoint so that a temperature is indicated whenever the VI is run?

I'm new to LabView so it will be a great help if I can get a push start on the project. I would like to measure the temperature through a FieldPoint connection. I know how to add the FieldPoint to the project, but I don't know how to proceed so that the VI indicates the temperature whenever the VI is run. 

0 Kudos
Message 1 of 3
(2,198 Views)

I'm not familiar with the FieldPoint hardware but there should be examples for it.  Look in Help >  Find Examples ... 

If FieldPoint uses DAQmx or something similar you should find examples like Temperature Monitoring.lvproj or Thermocouple - Continuous.vi.  They should get you going.

 

If not, try the FieldPoint forum:  http://forums.ni.com/t5/FieldPoint-Family/bd-p/110

LabVIEW Pro Dev & Measurement Studio Pro (VS Pro) 2019 - Unfortunately now moving back to C#, .NET, Python due to forced change to subscription model by NI. 8^{
0 Kudos
Message 2 of 3
(2,179 Views)

Thanks for the reply! 

I'm using FP-TC-120 at the moment. 

I'll look in the examples 🙂

0 Kudos
Message 3 of 3
(2,176 Views)