LabVIEW

cancel
Showing results for 
Search instead for 
Did you mean: 

Battery validation using LabVIEW and PXIe-4144 SMU

Hey,

 

I am designing Battery validation by using LabVIEW And PXIe-4144 SMU, I Want to Develop test Model for 3.3V  battery. What are all the things i can validate and How?

 

Thanks,

Swapnil

0 Kudos
Message 1 of 5
(1,918 Views)

Hi Swap,

 


@Swap7 wrote:

I Want to Develop test Model for 3.3V  battery. What are all the things i can validate and How?


Read the spec sheet of your "3.3V battery" to learn about all those things you can "validate"…

What is your exact requirement?

Best regards,
GerdW


using LV2016/2019/2020 on Win8.1/10+cRIO
0 Kudos
Message 2 of 5
(1,053 Views)

Hi GerdW,

 

Thanks for reply on my query,

I will check specs of battery.

I am working on it will come back to you.

 

Regards,

Swapnil.

0 Kudos
Message 3 of 5
(1,038 Views)

Hi,

 

The requirement is as below

 

1. I want to charge the battery with a charging voltage of 3,2V and a charge current of 3mA.

2. I want to load the battery by 

                          a) pulse with a pulse current of 45mA with a specific pulse width 

                          b) pulse with a pulse current of 15mA with a specific pulse width

3. Need to monitor below parameter

                           a) Battery voltage

                           b) sink current

                           c) charging time

                           b) discharging time

 

Please let us know if PXIe-4144 can be used for the above requirement.

 

 

Regards,

Soumya

                           

0 Kudos
Message 4 of 5
(1,025 Views)

Hi swap/soumya,

 

according to its specs the PXIe4144 should be able to deliver 45mA at ~3.5V.

It also allows rather fast measurement of voltage and current…

Best regards,
GerdW


using LV2016/2019/2020 on Win8.1/10+cRIO
0 Kudos
Message 5 of 5
(990 Views)