From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
> What would be reason for this kind of error message: > > Application error. Unknown SW exception (0xC0000008) occurred at location > 0x77f89041. > > I didn't find any glue in NI-Web-pages.
It's unlikely that you will find anything about this on the NI pages.
An exception is basically saying that an error occured. some of these can be taken care of by an exception (error) handler. This one indicates that the error (the 0xC00 part) is unknown and the program could not continue. The "at location 0x77......" is the location of the program in memory where it happened.
If it can be recreated then you have a better chance of finding it. If it does not occur very often then it probably can be ignored.
You dont say if this is a LabVIEW program or no t. If it is one you have written you might try to debug it. Kevin Kent