From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
From Friday, April 19th (11:00 PM CDT) through Saturday, April 20th (2:00 PM CDT), 2024, ni.com will undergo system upgrades that may result in temporary service interruption.
We appreciate your patience as we improve our online experience.
08-02-2006 02:16 PM
08-03-2006 10:24 AM - edited 08-03-2006 10:24 AM
Message Edited by Dennis Knutson on 08-03-2006 09:24 AM
08-07-2006 03:29 PM
08-07-2006 04:36 PM
I can't look at your VI since I only have 7.1 but most insane errors are the result of some corruption on the block diagram. One of the more recent posts on the subject is at http://forums.ni.com/ni/board/message?board.id=170&message.id=186132&query.id=0#M186132. If the VI is not too large, simply re-creating it from scratch may be best solution. Carefule about copy and pasting from the bad VI to a new one.
If you're able to save the VI as 7.1, I can try to look at it.
08-07-2006 05:05 PM
08-08-2006 08:40 AM
04-02-2014 03:57 PM
what card do we need to buy and cable do we need in order to run this?
04-02-2014 06:28 PM - edited 04-02-2014 06:31 PM
Resurrecting a thread that is nearly eight years old must me some sort of record.
Besides, isn't that a little backwards? Why would you want to buy hardware to run some software? Sounds like an extremely expensive solution to me. Besides, it's a reasonable assumption that the software won't even work on a contemporary computer.
04-02-2014 07:00 PM
04-02-2014 07:04 PM
@Dennis_Knutson wrote:
It's just a 7.1 VI that will load in any current version of LabVIEW.
krispkie,
What interface does the instrument have - GPIB, RS232? If GPIB, any of the controllers from NI will work.
I thought it was a third party driver. Usually they "cheat" and make the LabVIEW driver a wrapper for their dll.