2 Analog Input don't work together

[El-Awny]

I am doing a project using usb 6221 and DAQmx.
Using 2 IR Sensors to measure the distance
Everyone of them work good individual but together i get an 50301 error
The problem is I can't use two IR's Together and get the measures from them
How can i solve this problem to get the values from 2 sensors.

[LV_Pro]

You should be able to use two at a time. Do you have any LabVIEW code that we can look at to see what you are doing? Also a sketch of how the sensors are connected to the 6221 will also be very helpful.

[El-Awny]

This is the vi of one IR sensor.

[JÞB]

You can only have one AI Task running on that device at at time.  You can however, configure the Task to have both channels

[El-Awny]

How i can do this?

[aputman]

---

@El-Awny wrote:

How i can do this?

---

Inside the DAQ Assistant, add another channel.  You will need to get rid of the other VI for the second sensor.

[El-Awny]

I have done this already but i can't extract the data of 2 Sensors from the Daqmx.
Only One Sensor i can get its data.

[aputman]

Where is your code showing this attempt?  Do you have the wires hooked up correctly to the second sensor?

[El-Awny]

This is the code
and yes the wiring is right
my problem when i put the 2 sensors in One Daqmx .. I get one read from 1 sensor .. i can't the other ( The indicator is a numeric data of 1 sensor not an array )

[JÞB]

In the DAQ Assistant select Add to Add the other channel