Dears,
I have a small project which aim is: to control NXT motors by LabVIEW application with bluetooth connection. To this end and to test possible solutions I have used following files: http://decibel.ni.com/content/docs/DOC-11110.
I can:
1. connect to NXT through bluetooth
2. upload NXT client (Deploy) and run it through bluetooth
I cannot:
1. Control NXT motors even NXT module is running by use bluetooth
I usually get following message: "Error communicating with NXT Shell" (http://forums.ni.com/t5/image/serverpage/image-id/23722i52D00D5FFE31ACEA/image-size/original?v=mpbl-...)
I would be grateful solving this problem.
My configuration:
- Windows 7
- LabVIEW 2009
- NXT module for LabVIEW
- NXT 2.0, firmware 1.29
Best Regards
