LabVIEW User Group Euregio

Highlighted

Re: Introduction of new users

Hello everyone,

 

My name is Roger Custers, I'm 44 years old, proud dad of 3 daughters and live in a village near Roermond.

Just like my colleague Pascal Heinen (his introduction is a couple of messages above) I am one of the founding members of the Dutch LabVIEW User Group DutLUG and I work at VI Technologies as a system architect. In the past I worked for Philips Healthcare and Sioux. I've 25 years of experience with LabVIEW and in all those years I find that my enthusiasm has only grown.

 

A user group is a great way to share and discuss ideas around LabVIEW and meet new wireworkers 😄

Therefor looking forward to meet you all @ the LabVIEW-User-Group-Euregio meeting!

Message 11 of 17
(507 Views)
Highlighted

Re: Introduction of new users

Hello everyone,

 

My name is Joris Willems.

I am 32 years old and live near Diest in Belgium and work now for Melexis technologies in Tessenderlo. We use Labview to do the tests on the prototype elektronic chips to see if they are preforming as expected.

I started with Labview on my previous job at Punch Powertrain for the control and data logging on the testbenches. There it went back to work with Labview 8.2 on the older setups.

 

I heard about this user group at the DutLUG, This group I am attending from the beginning and since it has been a very nice way to get to know how people are using Labview and see what is all possible I added myself to this group to get to know more people that work with Labview and see how it all is used.

 

If you have any questions feel free to message me.

 

________________________________________________________________________
Problems will keep comming... Lets hope the answers do that to.
Never give up without a fight...
Message 12 of 17
(498 Views)
Highlighted

Re: Introduction of new users

Hello everyone,

 

my Name is Max Prell. I am 26 yeas old and live in Mönchengladbach, DE. I work at the Groschopp AG as an electrical engineer, where I build and program test stands for electrical motors. I started with LabVIEW in 2016, while my bachelor thesis about a test stand for small BLDC motors.
The newsletter from NI informed me, about this user group and I am looking forward to meet interesting people.

0 Kudos
Message 13 of 17
(473 Views)
Highlighted

Re: Introduction of new users

Hello,

I'm Bruno Grieco. I am from Brazil, where I started working with LabView back in 2007 in the Electric Energy Research Center (CEPEL) in Rio de Janeiro.

I moved to Germany (Cologne) a couple of years ago and now work for Tessonics, a company that uses Ultrasound Technology for Non-Destructive Testing in the Automobile Industry.

 

0 Kudos
Message 14 of 17
(441 Views)

Re: Introduction of new users

Hi everyone,
My name is Ashwin. I come from Goa, India and study in Kleve, Germany.
Currently, I'm doing my thesis on a concentrated solar power application to obtain heat, at the HAN, Arnhem. I'm using LabVIEW for the data acquisition and logging of sensors and to control things like a thermal bath circulator. Also the optimisation of the existing motor control.
I'm using LabVIEW for a couple of months now and looking forward to my first meet up!

Email: ashwinsinai@gmail.com

0 Kudos
Message 15 of 17
(436 Views)
Highlighted

Re: Introduction of new users

Hi everyone,

 

my name is Michael Leesker and I like to introduce myself a bit.

After an apprenticeship as an energy electronics specialist (operating technology) I studied electrical communication engineering at the TFH Bochum. During my later semesters I started to work as a student at the DMT Seilprüfstelle in Bochum, where I still work after my student days. I stuck with the DMT Seilprüfstelle because my job is interesting, challenging, and diversified.

 

I work with LabVIEW since then (about 20 years now) and started with Version 4.0, with some versions skipped I am now at 2017. I use LabVIEW for a wide variety of tasks such as data acquisition (sometimes paired with NI hardware), signal conditioning, simulating/maths and so on. Because of many other tasks, I am not a full-time programmer.

 

Though working in Bochum (and worldwide) assigning to the Euregio User Group makes sense, because I live in the region of Heinsberg.

 

For a long time I was the only LabVIEW programmer at my department, so it was and still is always interesting for me getting in touch with other programmers, because I think one could learn the most by discussing issues/problems and their solutions.

 

That's all for now.

I'm looking forward to the next UG-meeting,

 

Cheers

Michael

 

0 Kudos
Message 16 of 17
(420 Views)
Highlighted

Re: Introduction of new users

Hello everyone,

 

My name Christophe Rutten, I'm from the Liège area in Belgium and work for a mid-sized company which mostly provides services and products around vibrations of structures (acquisition, analysis, simulation, shaker testing, modal analysis, FEM,...)

 

I have a background in mechanical engineering and I started using LabView in 2009, while working as a research engineer on predictive maintenance problems for the University of Liège. At first, Labview programming was only part time but it is now a very significant part of my job.

 

My main areas of interest: OOP, acquisition and management of big amounts of time series data, user interface,...

 

 

 

 

 

Message 17 of 17
(374 Views)
Reply
This is an open group. Sign in and click the "Join Group" button to become a group member and start posting.