LabVIEW Time Sensitive Networking (TSN)

Reply
This is an open group. Sign in and click the "Join Group" button to become a group member and start posting.
Highlighted

Analog Input and Output Acquisition with TSN cDAQs Example

cDAQ AI AO.png

 

Example demonstrates how to setup a DAQmx Analog Input/Output tasks which share a same start time across three TSN cDAQ chassis. Example includes an optional phase calculation code which measure phase offset between acquired signals and graphs their waveforms on the front panel.

 

This example is setup to be run on a host PC but can be also run from a cRIO - 9035/9 (Sync) or IC-317x controllers. 

 

 

General Instruction Installing a VI Package (.vip) Example:

 

Download the attached .vip package to your PC. Double click on the .vip package which should open up a VI Package Manager (VIPM). In the VIPM window click on the "Install" button on the top left corner and wait for the installation to finish. Once the installation is finished, the example can be accessed from the LabVIEW example finder. In any LabVIEW windows click on Help>>Find Examples...>> Select 'Directory Structure' radio button>> scroll down and find TSN Community Examples directory. 
Alternatively, example source code will be placed in C:\<Program Files>\National Instruments\LabVIEW 2017\examples\TSN Community Examples directory.

 

example finder.PNG

0 Kudos
Message 1 of 1
(1,232 Views)
Reply
This is an open group. Sign in and click the "Join Group" button to become a group member and start posting.